Mazda 6 Spark Plug Torque
Mazda 6 Spark Plug Torque. Torque wrench (optional, but highly recommended) 3/8 ratchet key and extension ; 15—20 n·m {1.6—2.0 kgf·m, 12—14 ft·lbf}
$9.73 (28.60% off) sale price: Disconnect the negative battery cable. Use a spark plug socket (with the rubber insert) to remove the old spark plug in each cylinder.
Tighten The Spark Plugs To The Correct Torque Specification.
6 use the tension tool to test the tension or torque of the new spark plug. 1 million car parts from 150 premium brands for 45 car makes and 5914 car models. 7 reattach the spark plug wire to the new spark plug.
Torque The Fastener To 18 Ft.
Once you sign in, follow these instructions to access our repair guides. Every time that a spark plug its changed, the new plug needs to be calibrated ( regularly at.45 ), sometimes the new plugs are not calibrated. When cleaning the iridium plugs, do not use a wire brush.
Please Be Aware Of Delays In Shipping Services Now.
1.05—1.40 mm {0.0414—0.0551 in} new spark plug (reference): Do 1 at a time. 2) unplug all 4 spark plug wires (there is a small tab you must press down in the center for it to release the clip) 3) unscrew the 2 black 15mm screws 4) unscrew the 4 8mm screws 5) pull up on the black coil pack, and the spark plug will be exposed, and allow you to put your spark plug socket into it and twist it out.
This Goes For Conical Seat Spark Plugs Only!
Use the spark plug socket wrench or the magnet to prevent the spark plug from dropping and damaging the gap. Set the tension to the specifications listed on the spark plug package. Place the new ignition coil and push them down to lock it into place.
Actually, I Got The Torque Specs From The Factory Service Manual.
Reinstall the 8mm bolts on the coil pack and twist them clockwise to tighten. Add your vehicle in my vehicles. Click the “view more” button, and then click “vehicle repair guides.”
Post a Comment for "Mazda 6 Spark Plug Torque"